Several aqua computer products can be used to expand the functionality of the aquaero 5 Controller. The reason for this is many customers are overloading the circuitry and burning up the controllers and we will not be responsible for replacing any more of these units through PPCS. If you do not accept these terms then please do not purchase Aquaero. Be advised that Aquacomputer is in Germany and so any RMA would have to be sent to them directly. We will not warranty through our shop any Aquaero products. ***PLEASE NOTE and be aware that all RMA and tech support for this product is ONLY direct through Aquacomputer. All speed parameters and sensor values can be set and visualized in an user-friendly PC-software. There are loads of youtube videos that will help you with this so i'm not going to go into any more detail than that.The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface.
Unplug the leads into your motherboard and drives, un screw the PSU and it should lift out of the case. If you don't have an old/separate PSU I reccommend removing your PSU from your PC to test this. If you have an old PSU, use that! Once again it's not my fault if you break something (Including yourself) during this stage or any other. I don't reccommend LED fans, mine were LED and the change in voltage from changing the speed makes them go dim, not a massive issue but you might not want thatĪ computer or computer powersupply to give the fans power The 3 speeds will be off, half speed and full speedīeing able to turn case fans off helps you keep your computer quiet when you don't require the extra cooling, the two fan speeds allow you to turn the fans up when necessary and dow to keep the system quiet while still coolingĭC fans - I used 2 i bought on Ebay for about £1.50 each from China, they came with 2 wires for power(+/-) Not PWM 3 pin/wire type and a molex plug so they would run at 12v constantly (Loud) Please comment I can't be held responsible if you break stuff, i have tried to describe things as thouroghly as possible but if stuff breaks it's your fault not mine. This is my first Instructable so I hope it's alright :) I couldn't find a decent tutorial on fan controllers so i've made this simple one.
This instructable should help you build a simple 3 speed fan controller for any 12v dc computer fan.
0 kommentar(er)
